How to Repair a Garden Hose

You pull your garden hose out of the garage, screw it into the faucet, adhere the perfect nozzle, turn on the h2o and end up getting soaked. Information technology'southward the dreaded hose leak. Don't panic and blitz off to supervene upon the damaged hose just yet. With the right tools and these unproblematic methods, you can easily repair your hose and go back to watering the lawn in no time.

Small Leaks

If the water didn't squirt you in your face, you may have to become on a little hole hunt. When you observe the pocket-sized leak, hither are your mending options:

  • Pick ane – Use common electric tape or peculiarly designed hose repair tape. First, clean and dry out the hose before applying. Overlap the tap equally you lot wrap it around the hose. Don't wrap it too tightly or the hose will crease and the tape won't seal.
  • Choice 2 – Utilise rubber cement for tears and punctures. Dry out and make clean the area and utilise rubber cement to and effectually the hole. Fill in the hole, just not so much that it gets inside the hose.
  • Option 3 – Use a tire puncture repair kit. These are normally sold at bicycle repair shops or car part stores. Read the directions and apply the repair materials to the hole.

Leaking Spigot

A leaking spigot is often a sign that the washer is worn out and needs to be replaced. Washers dry out or deteriorate with historic period. Simply remove the old ane and put in a new 1. If information technology still leaks, replace the coupling. The coupling is the part that connects to another hose or to the tap.

Large Leaks

Mending a large leak is a footling more involved but all the same simple. This will require cutting the damaged department out and replacing information technology with a mender. Be sure to employ a sharp blade and make straight cuts when doing this. Take the cutting-out portion with yous when purchasing the replacement parts to be certain yous accept the proper pieces. Parts will also depend on whether you have a safe or vinyl hose.

  • Step 1 – Carefully cut out the damaged portion of the hose with straight lines.
  • Step 2 – Loosen the screws on the replacement coupler.
  • Footstep three – Insert the cut ends of each section of the hose into the side of the clamp mender. If this function is difficult, rub a lilliputian soap on the area to make it more pliable.
  • Step 4 – Tighten the screws until the clench is tight enough to not pull the hose out.
  • Footstep v – Attach the hose to a nozzle and turn on the water to test out the connexion. Keep tightening the connector until water no longer leaks.


To avert having to always repair your garden hoses, it'southward a expert idea to protect them. A well taken care of hose will last for many seasons. Always drain all the h2o out, go along it out of the sunday, roll information technology after y'all're washed using it and replace washers when they testify signs of dripping.

Resources plant on our website are provided as full general guidelines, and Reddi Industries does not assume whatsoever liability resulting from the provided information.

Leaking Garden Hose